Every release,
in one place.

The redesigned Calendar in Resi Studio puts your setup right on the calendar, so you can confirm your schedule is right the first time.

What’s new:

The new Calendar is live for every account and works on mobile. Adding and editing events works just like before.

Decoder version 3.2.0.8 is a Debian decoder update that meaningfully improves efficiency — so the decoders already in your rack work less hard to do the same job.

What it does:

• Lowers processing utilization across the board
• Improves thermal efficiency for cooler, steadier operation
• Extends the runway on existing hardware as your multisite footprint grows

Debian decoders below 3.2.0.8 will show an update available. Click the red flag icon in the decoder interface to start — it takes a few minutes, then reboots.

Decoder version 2.10.5.32 is a CentOS update that brings your server-grade decoders up to the current release — worth doing before your next service, not during it.

What it does:

• Brings CentOS decoders to the current release
• Keeps every campus on the same decoder version
• Installs in a few minutes with a single reboot

All CentOS decoders below 2.10.5.32 will show an update available — click the red flag icon in the decoder interface to start.

The D4310 is Resi’s new flagship server-grade decoder — built to push 4K at a higher frame rate and hold steady in the racks feeding your multisite campuses.

What’s new:

• Maximum output raised from 4K30 to 4K60
• Redundant power supplies and genlock, carried forward from the D2211 and D2212
• More robust internal components with headroom for heavier workloads

Studio AI just got a model upgrade — transcription and suggestions both run faster and land sharper, with nothing to change in your workflow. Upload as usual in Resi Studio and you’ll see it on your next file.

What’s better:

• Faster transcription with higher accuracy, even when the source audio is rough
• Suggestions that follow the actual structure of your message instead of generic themes
• Specific details pulled straight from your content — real references, not vague summaries

Decoder version 3.1.1.26 is a Debian decoder update focused on playback quality — steadier video at every multisite campus, service after service.

What it does:

• Delivers smoother, more consistent playback
• Improves frame timing for steadier video output
• Installs in a few minutes with a single reboot

Debian decoders below 3.1.1.26 will show an update available — click the red flag icon in the decoder interface to start.

Encoder version 2.0.2.20 is a Debian update that keeps your server-grade encoders current, supported, and ready for what’s coming to the hardware lineup.

What it does:

• Updates hardware drivers to support newer components
• Refreshes software images so encoders stay ready for future releases
• Keeps your fleet on a current, fully supported version

You’ll see the update option for your encoders in Resi Studio.

The Onboarding Checklist is a new widget on your Resi Studio dashboard that walks a new team from first login to first stream — twelve steps, grouped so nothing gets missed.

What it does:

• Organizes setup into three stages, so you always know what’s next
• Checks off each step automatically and shares progress across your organization
• Jumps you straight to the right spot in Studio — useful long after setup is done

You’ll find it on the Studio dashboard if you have a Live subscription.

Encoder version 1.15.8.44 is a Mini-only update focused on audio reliability — one less thing to double-check before you go live.

What it does:

• Makes audio come up with your stream consistently, without manual intervention
• Applies to both Mini with HDMI and Mini with SDI
• Installs in a few minutes from Resi Studio

Encoder version 1.15.7.39 is a Ray-only update that strengthens performance at higher encoding frame rates — steadier audio and video when you’re running 50 or 60 fps.

What it does:

• Improves stability at 50 and 60 fps encoding
• Applies to Ray encoders only — no action needed on Mini or server-grade units
• Installs from Resi Studio

Speaker Tracking in Studio AI is faster — quicker, more responsive tracking you’ll notice on your very next clip.

What’s better:

• Faster tracking with a more responsive result
• The same smooth, natural motion built for vertical clips
• Rebuild an earlier clip with Use as Template and watch the difference side by side

Clip suggestions in Studio AI now stay locked on the message — even when you upload a full service without trimming down to the sermon first.

What’s better:

• Keeps suggestions focused on the message, with no pre-trimming required
• More relevant, more consistent clip recommendations
• Applies to your next upload, with nothing to change in your workflow

Videos enriched before this update keep their original suggestions.

Speaker Tracking in Studio AI helps you keep the speaker in view with smooth, natural motion designed for vertical clips.

No empty frames. No distracting shifts. Just a steady shot that keeps the message centered.

What it does:

• Keeps the speaker in frame for vertical video
• Follows movement with smooth, predictable motion
• Reduces the need for manual adjustments

The Go Live API now works with Q-SYS — start and stop a Resi stream from the same control system already running your room, without logging into Studio.

What it does:

• Triggers Multisite and Live streaming events straight from a Q-SYS control surface
• Brings one-button streaming to rooms already automated with Q-SYS
• Matches the functionality of the existing Bitfocus Companion and Stream Deck plug-in

Using it requires Go Live API access, an API client created in Studio, and a Q-SYS Control license.

Bulk Delete lets you clear out your Resi On Demand library up to 100 videos at a time — library cleanup that takes a few clicks instead of an afternoon.

What it does:

• Select and delete up to 100 videos at once
• Switch between list and gallery view while you select
• Confirm before you commit, with every video listed and an estimate of the space you’ll free up

Storage usage can take up to 24 hours to reflect the change.

Live Player in Media Sites lets you stream live events directly on your Media Site — so live and on-demand content live together in one place.

With our new Live Player, you can:

• Stream live events via a personalized Media Site
• Keep viewers focused on your content, not third-party platforms and ads
• Connect live and on-demand experiences in one seamless flow

Built directly into Resi Studio, Studio AI accelerates your post-production workflow and helps your videos reach more people.

With Studio AI, you can:

• Clip: Turn sermons and long-form content into short, social-ready videos.
• Transcribe: Generate accurate, searchable transcripts and captions in seconds.
• Enhance: Get suggestions for titles, tags, descriptions, and discussion questions.

Social Only subscriptions can now add custom RTMP destinations — which means you can stream to destinations beyond the built-in social integrations, including Facebook Groups.

What it does:

• Opens custom RTMP destinations to Social Only subscriptions
• Lets you reach Facebook Groups, which need a custom destination rather than the standard Facebook integration
• Works with your existing scheduled events and Go Live workflow

Streaming to a Facebook Group means scheduling it in both Facebook and Studio.

The Go Live API lets your team start and stop a Resi live stream with a single button press using Bitfocus Companion or an Elgato Stream Deck—without ever logging into Resi Studio.

That means:

• Faster stream activation during spontaneous moments
• Less reliance on technical staff
• More confidence for volunteers and part-time team members
• Streamlined workflows that fit into the systems you already use

Introducing the Resi Mini Encoder with SDI, the compact encoder that brings SDI connectivity, SDI Loop Out, and professional-grade performance to your streaming toolkit.

• SDI input + SDI Loop Out for secure, pro-level workflows
• Ships in a durable hardshell case for easy transport and protection
• Compact design with plug-and-play simplicity